Category: Tech

Five Methods to Fix Frozen MacBook when Booting Up

Introduction

MacBook laptops sometimes run into the issue of not booting up for some reason. It could be because of corrupted startup file, incompatible operating systems with the MacBook model, bad startup disk, and so on. When these issues exist, it becomes harder to start up the MacBook normally. 

This article provides five simple methods to fix frozen MacBook that is not booting up. It explains these step processes and applicable solutions to scenarios when the Mac is not booting up.

Methods of Fixing MacBook That Is Not Booting Up

Below are the top five recommendations to get your MacBook up and running once again. They are:

  1. Safe Mode Boot

Booting in Safe Mode limits the number of checks and processes that Mac focuses on while trying to boot. It is very useful for performing certain diagnostics to discover the real issue with the laptop not booting. 

To proceed with safe mode, first force shut down the Mac. Next, press and hold down the shift key immediately after restarting the Mac. To get some feedback on the actions you are taking while trying to boot in safe mode, press and hold the ‘Shift + Command + V’ key combination when you restart the Mac. This will boot into safe mode alongside verbose mode. 

You should see safe mode written on the top right corner if you are successful. The safe mode interface also looks a bit different with blocks of color in comparison with the usual transparency. Once you are in safe mode, try uninstalling recent software or undoing recent settings changes. 

  1. PRAM/NVRAM reset

Parameter Random Access Memory is a special memory section that stores data in the Mac for shutting down, volume settings, and screen resolution. Resetting PRAM helps to reset the parameters to the default value and helps to end any process disrupting proper boot-up. 

To reset PRAM/NVRAM, first shut down your Mac. Click and hold down the ‘Command + Option (alt) + P + R’ key combination immediately after restarting. Keep holding down these keys for at least 5 seconds before releasing the keys. This should reset your Mac and allow it to restart normally. In other cases, you boot to the progress bar and your Mac starts up after some minutes.

  1. System Management Controller (SMC) Reset

The SMC is responsible for low-level hardware functions like power button action, battery management, LED, and so on. Resetting the SMC will return the power management settings to default and help to fix the boot failure. 

To begin the reset process, make sure the Mac is shut down by long pressing the power button. After about 15 to 20 seconds, hold down the ‘Shift + Control + Option’ key combinations and press the power button for about 10 seconds. Release the button and restart the Mac to see the result.

  1. Disk Utility option in Recovery mode

A corrupt drive might prove to be incompatible with the startup process because of some corrupt files. Using the recovery mode, a fix for the drive can happen with the ‘First Aid’ feature in the Disk Utility option. The first step is to get the laptop to boot in recovery mode. To do this, first force shut down the laptop. Then proceed to click the ‘Command + Option + R’ key combination immediately after restarting.

When the screen shows the ‘macOS utilities’ menu, your Mac is in recovery mode. Proceed to navigate to the Disk Utility option. From the Disk Utility, select the startup drive and apply for the ‘First Aid’ program on the drive. If there are errors with the startup disk, the Disk Utility will help fix them.

  1. File system check

In a scenario where the file system is the reason why MacBook is not booting up, running a check and slightly modifying it will help fix the issue. Although this step is a bit technical, it is easy and quite straightforward. To begin this process, first shut down your Mac. Restart with and press the ‘Command + S’ key combination. This launches the Mac in single-user mode. You should release the keypress only when a black screen and white text appears on the screen. 

Next, enter the ‘fsck –fy’ command in the command line prompt and click the return key. Wait while the file system modification is ongoing. After the checks are over, you should see either one of the two messages: ‘The volume (Mac name) appear to be OK’ or ‘FILE SYSTEM WAS MODIFIED’.

Proceed to type reboot and press enter to restart your MacBook. 

Data Recovery with iBoysoft

One thing you worry about the frozen MacBook is the data within. There is one effective solution from iBoysoft Data Recovery for Mac to recover data from a dead MacBook. iBoysoft offers an effective and efficient data recovery software that helps to recover important data from your laptop. It offers the option to recover your files from the laptop that might have some fault. 

In three easy steps, you can recover your files. First, download and install the iBoysoft tool free from the internet. The second step is to launch and perform a quick or deep scan of the disk you select. Thirdly, preview and recover the files you choose to recover. You are suggested to store these files on an external hard drive instead of saving them in the original location. 

Fortunately, when your MacBook refuses to boot up, iBoysoft data recovery can help you recover your data. Through the terminal, you can launch the iBoysoft tool and save your data to an external device. From the recovery mode, select terminal on the ‘macOS utilities’ screen. 

In the terminal command window, enter the following command: ‘sh <(curl http://boot.iboysoft.com/boot.sh) command to launch the iBoysoft data recovery. From the software interface, select the disk you wish to scan and perform the scanning process. Select the files you need to recover and select ‘recover’. For this data recovery process to work, make sure your Mac has an active internet connection.  

Gadgets and Apps for Back to School / Uni 2022

Whether starting secondary school, going to college or leaving for university in September, no doubt pupils and students already have a long list of everything they need. Ten Four Communications has put together a few additional suggestions – from an alarm clock to get them to lectures on time and multifunctional colour changing lamp for their desk to a reusable notebook/planner to keep them organised – that they may want to consider. 

Groov-e Soundbar 20 

Price: £29.99 

Available from: www.groov-e.co.uk from September 2022.  

 

 

This new wireless soundbar from Groov-e is a must have for any student heading to university this year. Providing impressive sound quality, simply connect via Bluetooth to a compatible device to listen to music, watch movies or make hands free calls. Colour changing LED lights make it the perfect addition to any party plus it is lightweight and portable so can be taken anywhere – another room, garden party or even home for the weekend. An integrated stand pops out to hold your smartphone or tablet making it perfect for those who want to binge Netflix series when not studying. Featuring a rechargeable battery it offers 10+ hours of playback on a single charge.  

Price: £34.99 

Available from: www.groov-e.co.uk and Smyths Toys  

 

 

 

The Groov-e Astra is a multi-functional, colour changing lamp which features a wireless charging pad and Bluetooth speaker. It is perfect for a student’s desk, getting rid of messy cables and allowing them to charge a mobile phone while working, studying, reading or sleeping.  

Whether users need extra light at their desk to revise for exams, or on their nightstand so they can read before bed, the Astra features 9 LED light modes to ensure they have the right level of brightness. Also, perfect for mood lighting, users can change the colour of the light it emits at the touch of a button. 

Astra’s flexible arm means users can adjust the light to their preferred angle, ensuring they don’t strain their eyes and can work or read more comfortably. Additionally, Astra has an integrated 3W wireless speaker.  Users simply connect a device via Bluetooth from up to 10m away to listen to their favourite tunes.   

  

Price: £49.99 

Available from: TwelveSouth.com or Amazon.com 

   

The Twelve South ParcSlope is a one-piece metal stand that raises a laptop screen to an optimum viewing position while keeping the keyboard angled and low to the desk for comfortable typing. Whilst the ParcSlope is a great addition to any desk setup, it is also small and light enough that it can be moved around the home in the event students want to study from their kitchen island or dining room table. With ParcSlope, users will enjoy better ergonomics that help to relieve shoulder and wrist pain, a video call friendly viewing angle and an open wedge design that allows for increased airflow and a cooler, quieter laptop.

For iPad users, ParcSlope angles the device to a wrist-friendly 18-degree angle that’s perfect for sketching, creative work, note taking or performing music. The matte black easel stand is sturdy and holds every iPad (except iPad mini) in a landscape or portrait mode. ParcSlope even allows users to turn their iPad into a mini desktop by pairing it with a wireless keyboard providing an even smarter way to work. 

  

Price: £299 

Available from Amazon UK 

 

 

Small but agile, Bittle is a powerful robot that can be programmed to walk, do tricks and roll around just like a real dog. Designed for coding and fun, Bittle operates on OpenCat, an open-source quadrupled robot platform that offers endless programming and customisation possibilities. Bittle is an ideal tool for teaching, researching and learning about STEM and robotics. 

   

Price: £39.99 

Available from: www.groov-e.co.uk 

 

  

Waking up for school or uni can be hard but with the Light Curve wake-up light, alarm and radio, users can start their day a little easier. The light, which mimics natural daylight, will come on at the selected time, starting off gently and gradually getting brighter until it’s at the optimum level to help rouse sleepy-heads up. When it’s actually time to get out of bed, a chosen alarm sound or radio station will also be activated to help users wake fully.

For those who like to read or need the light on darker mornings to get ready, the Light Curve has 10 levels of brightness using its LED lamp. And for those who want to create more of an atmosphere, one of the seven coloured mood lighting options can be selected.  

   

Price: £39.99 

Available from: Amazon.co.uk   

 

 

Rocketbook notebooks and planners provide a classic pen and paper experience, yet are built for the digital age. Not only can handwritten notes be digitised and sent to the cloud using a smartphone and accompanying Rocketbook app, the ink (when you write using any pen from the Pilot FriXion Line) can then be quickly erased from the pages with a damp cloth, enabling the books to be used over and over again and saving paper in the process. The Academic Planner has been designed for students and approved by teachers. It is equipped with 13 different page types to help you manage class schedules, weekly goals and daily workloads. 

  

Price: £38.99 

Available from: Amazon.co.uk 

 

 

 

Rocketbook has partnered with Panda Planner to combine inspiration with innovation. The Panda Planner features undated monthly, weekly and daily templates to organise your life as well as goals and motivation templates. The innovative synthetic paper allows you to write smoothly with a Pilot FriXion pen then magically wipe your planner clean with a damp cloth to use year after year. The Rocketbook app scans and connects your notes to the cloud to digitally save and share your notes.  

Price: Basic (free), Personal (£5.99 per month), Professional (£7.49 per month) 

Available from: Apple App Store or Google Play 

  

 

Evernote automatically saves notes online and makes them available on all devices so you can access them anywhere, anytime. Ideal for students who do a mix of online and in-person studying or like a change of scenery. The document scanning function is also useful for copying from text books and the Search Handwriting feature identifies words in handwritten pieces.

Siemens establishes R&D operations in Shannon, with a €7 million investment and the establishment of its first global ‘Cloud EDA’ R&D group

Siemens Digital Industries Software will establish a software research and development group in Shannon, Co. Clare. The multimillion-euro investment will focus on High Performance Computing (HPC) in the Cloud for semiconductor design.

The project, which is supported by the Irish Government through IDA Ireland, is the first ‘Cloud EDA’ R&D group to be established by Siemens Digital Industries Software globally, and enhances Ireland already a strong reputation of in Cloud Software Development and HPC R&D.

This division is expected to create more than 25 new and highly impactful R&D roles in Shannon over the next three years, focused on delivering cutting edge cloud HPC environments for Siemens EDA workloads.

Tánaiste & Minister for Enterprise Trade & Employment Leo Varadkar said: “This is great news from Siemens, investing €7m in Shannon and creating 25 new highly skilled jobs over the next three years. It really demonstrates the skill and reputation of the company’s existing staff here that such a significant investment would be made in such an area of importance for the company. The very best of luck to the new team.”

Joe Sawicki, VP, Engineering, Siemens EDA, said: “We are excited about the new R&D division in Shannon focusing on Cloud development. The cloud represents a step change in capability for our Electronic Design Automation (EDA) customers and harnessing its potential will be key for our continued success.”

Martin Gennery, Sr. Director for Siemens Industries Software Limited and the site lead in Shannon added: “It is excellent to see Siemens demonstrate its continued commitment to Shannon as a strategic location by locating its first software R&D division in Ireland here. Due to Shannon’s central location in the mid-west between Limerick and Galway it has always attracted top talent. This expansion offers an opportunity to work on the latest technologies while benefiting from the work life balance delivered by hybrid working based in the mid-west.”

Siemens EDA (formerly Mentor Graphics) has had a significant presence in Shannon for over 20 years, delivering key financial and business operations worldwide. The Shannon operation of Siemens Digital Industries Software currently employs 150 people and is continually growing.

The rapidly expanding software R&D group is commencing recruiting for roles related to a multi-cloud hybrid PaaS/SaaS project including Cloud Infrastructure, Software Development, Application Security, DevOps, HPC & EDA.

Denis Curran, IDA Ireland’s Head of Property & Regional Development said: “Siemens is a longstanding employer in the Mid-West region.  The addition of this new R&D function and the associated transformational impact on the position of the Irish site within the global organisation is significant. I wish to congratulate Siemens on this expansion and wish them every success”

For more information visit https://new.siemens.com/ie/en/company/jobs/search-careers.html

Smart Buildings and IoT: Applying the Internet of Things (IoT) to Create Smarter Buildings

As the world population grows, the majority of the population will be concentrated in urban areas. The cities will become more congested, creating challenges in managing crime, traffic, sanitation, and sustainability.

Smart buildings are one of the best solutions for the challenges with a growing population. Virtually any kind of building can be “smart,” employing automation to control security, lighting, heating, ventilation, and air conditioning to become more efficient and comfortable.

Find out how the Internet of Things (IoT) is integral to the smart buildings of the future.

What Is a Smart Building?

Smart buildings are buildings with IoT-enabled devices that use sensors to monitor different aspects, analyze the data, and provide insights to optimize operations. These buildings have a central management system that brings together different processes to make the oversight and responses more efficient. According to Conerney estate agents and letting agents in Dublin, the smart buildings sector is going to grow immensely in the near future.

Some common aspects of smart buildings include real-time data transfer, two-way communication, and automation. 

Key Components of a Smart Building

The fundamental component of a smart building is the ability to connect to a wireless network and collect, share, and analyze data in real-time to develop actionable insights. All smart buildings rely on this technology, along with an intuitive interface that can be used by technical and non-technical users alike.

Wireless Communications

Wireless communications allow the devices in smart buildings to “talk” to each other. Without the ability to share information, the devices wouldn’t be useful.

Real-Time Data Analytics

Real-time data analytics are necessary to provide decision-makers with information to understand the behaviors of the residents and identify patterns to minimize risk and optimize processes for better security and efficiency.

User Interface

If smart buildings are intended for widespread use, it’s important for the interface to be understandable and functional for non-technical users. They will be using and interpreting data differently.

Most smart buildings feature central data collection, reporting and management, and analytics in one streamlined dashboard, which is connected to the cloud. Decision-makers can connect from anywhere, at any time, to respond faster.

Advantages of Smart Buildings

Smart buildings are similar to living organisms. They take in the information from the surrounding environment, communicate with others, and make informed decisions based on what they experience. A smart building does the same by bridging the gap between the digital and physical environments.

Sustainability

Population growth creates considerable challenges with impact and sustainability. With social and regulatory pressures to lower carbon footprints and generate efficient, clean power, the best solution is for decision-makers to have access to detailed usage information and energy monitoring to optimize use.

For example, automated and centralized environmental controls can be optimized for efficiency, such as heating, air conditioning, and lights that only operate when there are residents in a room.

Efficiency

Closely tied to sustainability, smart buildings can improve efficiency by using automation to replace humans for mundane tasks. Smart buildings are quick and efficient to get set up as well, and they require fewer resources throughout their lifecycle.

Reporting

Smart building systems collect data on sustainability and compliance to generate reports. This not only helps to address the growing social and regulatory pressure to become more efficient and sustainable, but it saves decision-makers time in gathering the necessary information.

Personalization

Smart buildings are tailored to the user’s preferences. As more data is collected and analyzed, smart buildings adapt to the preferences of the users and provide personalized resources and efficiency. On the building-wide level, the decision-makers take measures to protect the health and safety of the residents.

Better Customer Experience

Though smart buildings maximize efficiency building-wide and adapt to user preferences, they also provide personalization and an improved customer experience. Devices adapt to the needs of users automatically, but they retain control over certain aspects like climate control or lighting in their personal space.

Health and Safety

Smart buildings offer a lot of advantages for safety. For example, devices can monitor and evaluate the building space to identify risks, such as gas leaks or electrical hazards, and address them quickly.

Space Optimization

IoT devices offer insights into how buildings can be designed and structured to optimize space to adapt to the needs of users, the weather patterns, and more, which maximizes efficiency.

Smart Building Use Cases

Smart buildings have practically no limit to what they can be. Each building can be customized to the specific needs of the organization, but these are common use cases for smart buildings and how they use data to optimize their processes.

Health and Safety

Smart buildings promote safety and health for both users and employees. Following the COVID-19 pandemic, a huge focus is on workplace health and safety. Smart buildings can monitor air quality, optimize cleaning schedules, and adapt ventilation as needed.

Optimization

The devices in smart buildings monitor and control the environment and optimize it with automated responses, such as air quality monitoring or fire equipment testing. Lighting can also be set to adjust to occupancy to reduce energy consumption and make the space safer and more inviting.

Security

Smart technology improves safety in a number of ways. Sensors can be used to track and control power, water shutoff, leak detection, motion sensors, and fire safety. It protects from both environmental risks and crime risks, as well as cybersecurity risks.

User Experience

Over time, smart buildings can store user behaviors and patterns to offer the most current information for the future. For example, devices can monitor the ideal temperature and lighting and adjust it to the ideal levels to ensure both environmental comfort and a well-lit, welcoming space.

Asset Management

Any organization needs visibility of the business processes and assets to provide the best service to their customers. IoT smart tags help decision-makers track their tools and resources. If anything is out of place or stolen, they’ll get an alert.

The Future Is Smarter

IoT adoption is increasing in virtually every industry, and smart buildings are the next big wave as we address the ongoing challenges of population growth and congestion in urban environments. Smart buildings offer numerous advantages, including sustainability, user-friendliness, comfort, safety, and security. 

Author Bio:
Xavier DUPONT

Xavier DUPONT

Xavier Dupont is the Senior Director Product Line, at Lantronix, a global provider of turnkey solutions and engineering services for the internet of things (IoT). Xavier’s and Lantronix’s goal is to enable IoT and their clients digital transformation by providing technology block from sensing, to data collection and visualization.

Top Benefits of Student Engagement and Retention Platforms

People in all spheres, including students and lecturers, have benefited from the continual advancement of technology. Plenty of websites and apps are available to help college and university students manage their schoolwork such as proessaywriting.co.uk. Additionally, students are increasingly using laptops, tablets, and smartphones in class and at home, both for academic purposes and for personal use.

However, the widespread adoption of these gadgets and the shift to the online sphere have resulted in a decline in students’ attention, thus decreasing their engagement in learning activities considerably. Luckily, this is where student engagement and retention platforms come into play. 

What Are Student Engagement and Retention Platforms?

A student engagement and retention platform is a tool that keeps a record of student profiles and academic information. It is the most effective way to capture each student’s personal input, plus it facilitates real-time communication between students and faculty members. 

Every time students interact, their data are added to centralized, unified profiles. This contributes to a more personalized experience for each student and is an excellent way for lecturers to track their students’ performance and understand them better. With apps like the student engagement and retention platform by campusM, educators can gain valuable insight into areas such as student attendance, daily submissions, and interactive activities. 

In addition, a platform like this can be used to promote events, increase attendance, and engage students more effectively. But the ultimate goal is to encourage student participation and retention in the classroom and on campus.

Benefits of Student Engagement and Retention Platforms

The following section outlines a few benefits of using a student engagement and retention platform.

Better Understanding of Student Needs

Detailed analyses and student participation reports can help universities determine which events or methods of delivering courses should be used and which ones should be discarded. With this data, lecturers can plan for the future and make informed decisions.

Automation of Tedious Tasks

Lecturers no longer have to spend hours on time-consuming processes such as grading, marking, and tracking student performance. Engagement and retention apps can make grading assignments, conduct discussions, and manage event participants instead.

Personalized Student Experience

Using engagement platforms allows institutions to tailor learning to the needs of each student. Thanks to the app’s unique features, learning content is customized according to the student’s strengths, interests, ethnicity, community needs, and cultural background.

Furthermore, teacher assistants, with their teacher aide courses, can provide further personalized care, behavior, and experience for the teachers to their students. Students can choose topics that interest them and participate in related activities.Still, these platforms don’t only benefit the students in the long run — they are good for the lecturers, too. Personalizing a student’s experience requires an ongoing team effort, but in the end, the lecturers will also reap the benefits of streamlined workflow, automated alerts, and automatically generated feedback.

Increased Student Engagement

The software tracks students’ participation and evaluates a course’s effectiveness based on their feedback. Moreover, it may be possible to increase engagement and retention levels with emerging technologies, such as augmented reality (AR) and virtual reality (VR) — especially for those students who have difficulty following text-heavy courses. This article also provides valuable information on increasing student engagement in the classroom. 

Valuable Student Insights Uncovered

Understanding student behavior allows teachers to make better decisions that will help young minds flourish. A student engagement and retention app enables lecturers to easily create robust reports and generate actionable insights that everyone can use to stay on top of things and take the best possible action.

Universities can also gather information about the common reasons for dropping out. Collecting such feedback allows the faculty to identify at-risk individuals and improve their overall experience.

Unified Student Profiles

The data on student engagement and retention is often scattered across multiple formats and systems. However, with student engagement and retention platforms, this information is easily collected, unified, and organized into a single profile that can be accessed anytime.

Petoi unleashes 20% off Bittle robot dog for Amazon Prime Day

To celebrate Amazon Prime Day (12th & 13th July 2022), Petoi, the maker of futuristic robotic pets, is offering 20% off its palm-sized, bionic robot dog – Bittle. Available from Amazon UK here, Bittle will be reduced from £299.99 to £239.99, a saving of £60. Petoi will also be offering 20% off Bittle accessories including the Additional Battery Pack (was £39.99, now £31.99) and the Intelligent Camera Module (was £59.99, now £47.99).

Small but agile, Bittle is a powerful robot that can be programmed to walk, do tricks and roll around just like a real dog. Bittle operates on OpenCat, an open-source quadrupled robot platform that offers endless programming and customisation possibilities. It is an ideal tool for teaching, researching and learning about STEM and robotics.

Users bring Bittle to life by assembling its puzzle-like frame which is made up of 3D interlocking components, eliminating the need for screws. The bionic construction of legs rather than wheels means that Bittle is able to move more freely over unstructured terrain. With a simple and beautiful design, Bittle can be configured and controlled using Petoi’s official mobile app.

Evolving with an open-source gene, Bittle is built on Petoi’s OpenCat open-source platform which was first launched in 2018 by Petoi’s founder Dr. Rongzhong Li specifically for quadrupled robots. Bittle’s dynamic maneuverability and behaviours are features typically seen on luxury robots but Petoi’s technology is now making it accessible to more consumers.

With a customised Arduino board coordinating all instinctive and sophisticated movements, users are able to clip various smart sensors onto Bittle or mount a Raspberry Pi or other AI chips through wired/wireless connections to inject perception and artificial intelligence capabilities.

Features include:

  • OpenCat framework
  • Arduino compatible motion controller & wireless connectivity
  • Interlocking plastic frame
  • Shock reduction joints
  • Programmable gaits and behaviours
  • 9 x fast, powerful digital metal servos

For more information, please visit https://www.petoi.com.

SHURE Has Announced Exceptional Deals For Amazon Prime Day 2022

With Amazon Prime Day right around the corner, Shure is showcasing hot deals on a variety of products. Headphones, microphones, and more are included in the deals, with certain products up to 45% off! Whether you’re looking for an excellent podcasting microphone, professional audio equipment, or superior audio for your home set-up, Shure’s Amazon Prime Day deals of 2022 are here to help.

Check out the deals below.

Shure’s full list of Prime Day deals:

AONIC Earphones
Earphones with exceptional audio for your daily audio requirements.
AONIC 215 UNI Black Sound Isolating Earphones. With 28% discount.
AONIC 215 UNI Blue Sound Isolating Earphones. With 28% discount.
AONIC 215 UNI Clear Sound Isolating Earphones. With 28% discount.
AONIC 215 UNI White Sound Isolating Earphones. With 28% discount.
AONIC 3 UNI Black Sound Isolating Earphones. With 35% discount.
AONIC 3 UNI White Sound Isolating Earphones. With 35% discount.
AONIC 4 UNI Black Sound Isolating Earphones. With 34% discount.
AONIC 4 UNI White Sound Isolating Earphones. With 34% discount.
AONIC 5 UNI Black Sound Isolating Earphones. With 34% discount.
AONIC 5 UNI Clear Sound Isolating Earphones. With 34% discount.
AONIC 5 UNI Red Sound Isolating Earphones. With 34% discount.
AONIC FREE Gray True Wireless Sound Isolation Earphones. With 45% discount.
AONIC FREE Red True Wireless Sound Isolation Earphones. With 45% discount.
AONIC 215 TW2 Blue True Wireless Sounds Isolating Earphones Gen 2. With 13% discount.
AONIC 215 TW2 Black True Wireless Sounds Isolating Earphones Gen 2. With 13% discount.

Microphones:
When you are performing or recording you need professional audio to make sure you’re heard. Shure’s microphones meet all your needs.
MV88/A Digital Stereo Condenser Microphone. With 24% discount.
MV88+ Video Kit, Digital Stereo Condenser Microphone. With 33% discount.
MVL 3.5 MM Lavalier Microphone for Smartphone or Tablet. With 26% discount.
MV88+ Stereo USB Digital Stereo Condenser Microphone. With 30% discount.
VP83 LensHopper Camera-Mount Condenser Microphone. With 39% discount.
VP83F LensHopper Camera-Mount Condenser Microphone with Integrated Flash Recording. With 48% discount.

Accessories:
RMCE-TW2 True Wireless Secure Fit Adaptor Gen 2. With 16% discount.

Video
MV88+ SE215 CL Portable Videography Kit. With 30% discount.

Find Your Fashion Inspiration with Google Lens

See an outfit that’s caught your eye or want to find a similar style of a sold out item? Google Lens can help you get your wardrobe summer style-ready by searching what you see.  Whether it’s an image that you see online, a photo you saved on your phone or something in the real world that catches your eye, Google Lens makes the products you see instantly shoppable. And this is something I use almost daily and find it a valuable tool and a fine example below is one with trainers who my readers know that I am an avid collector of Nike trainers.

Google Lens can also show you new ways to style clothes you already own. Give new life to that old top you haven’t picked up in a year—simply point Lens at it to see how others have worn a similar one and find pieces that might match it. So if you see a leopard print skirt you like on social media, take a screenshot and use Lens to see how other people have styled similar looks.

Grainne Binns & Tolü Makay

How to use Google Lens as fashion inspiration:

  1. On your phone or tablet, open the Google app or Google Photos

  2. Select a photo from your camera roll/take a live photo of an item of clothing

  3. Get reviews on the product, shop the item, find similar items or style inspiration

Google Lens is available on Android from the search bar widget on the homescreen, the camera app on many flagship devices, and in the Google, Google Photos, and Google Lens apps on any smartphone.

How to Convert EML to PDF

Are you looking for a way to convert EML files to PDF format? Don’t fret: here we will put forward the best and most amazing benefits of conversion of EML to PDF files. 

The first thing you need to know about this topic is understanding what an EML is. It can be described as a method applied by organizations that get involved with the handling of numerous emails daily to manage emails on their PC or laptop. Some applications that actively employ this methodology are:

 

  • Mozilla Thunderbird;
  • Microsoft Outlook Express;
  • IBMs Lotus Notes;
  • Windows Mail.

 

At Сoolutils online, you can learn more about how to convert EML to PDF files.

Some unavoidable instances will normally prompt one to transform ELM into PDFs at some point. This want is always necessitated by the growth in the need to provide more security to the file. It is widespread knowledge that PDF provides a vast source of security features and hence is most preferable to many. Ideally, most EML format messages are stored in plain text. This is very different compared to a PDF document as it can store data containing text fonts, images, and hyperlinks. The idea behind this observation is mainly to secure these documents from undergoing any modification.

What Features Should One Look Out for in an EML to PDF Converter Software?

  • It should permit conversions to take place in any format without any underlying challenges. 
  • One that can allow flexibility in converting both single and multiple files for attaining efficiency.
  • A PDF conversion software chosen should be able to give a simple preview of how the file will appear after conversion. This is very helpful since necessary adjustments can be done before a permanent measure has been undertaken.
  • When choosing a converter, make sure that the one decided upon has no size restrictions backed on them and that files of any size can be converted regardless.
  • The software selected should be very flexible in a manner that deems it possible to split files into smaller files.
  • The PDF converter chosen should be able to provide an alternative to choosing the destination folder while saving the converted PDF document.

What Are Some Reasons Why You Might Need an EML to PDF Conversion?

  • Security purposes. If you want to ensure that your documentation is accorded high security, you need to adopt the culture of saving EMLs in PDF formats promptly. It is a very efficient method that ensures that no unauthorized eye gets a chance to glimpse at the information. The message will only be available to the intended persons. This is achieved since one can encrypt emails with passwords that only the intended parties can access. Consequently, alteration of information in this module is near impossible.
  • Another advantage that emanates from PDF converters is the fact that one can store and convert different PDF files and save them in one attachment, ensuring that efficiency is achieved to a greater measure.
  • One can certainly save numerous EML files as PDFs in a distinct location as a backup.
  • For an EML, one has to have an email client. With PDF files, it can be accessed from anywhere.
  • PDF files can be used as essential pieces of evidence for digital forensic investigations purposes.

 

We recommend the application of the professional technique over the manual process. The use of the manual method is very slow, and it will end up taking most of your time hence necessitating all people to migrate towards using the new effective methods. It allows easy conversion and has an email cleaning feature. 

It can convert EML files to PDF and numerous additional file formats. It can also migrate manifold file data to diverse email clients. It is well-matched with all devices and affords a free showpiece form.

Even though labor-intensive tactics are dependable enough in printing EML to PDF, they aren’t skilled in converting numerous EML files to PDF sideways with attachments. It is therefore advisable for any user to attempt a competent resolution that supports them to execute conversion together with attachments. 

Discover the great structures of this certified EML to PDF converter software to transfer in bulk EML to PDF files within a brief lapse of time.